06/04 2002
Video Case Cover Book Box
After creating various items out of worn-out video tapes I was left with the cardboard covers. Never being one to throw things out I came up with a creative use for them. I made them to look like a book, so now I can store things without giving away the fact that it is a storage box.
Materials
- 1 cardboard video box
- piece of heavy card board
- wrapping paper or contact paper
- masking tape
- glue
Instructions
- Cut the cardboard into 3 piece, the front, the back and the spine. The front and the back are the same size 4¾x8 inches. Round out 2 corners by placing a penny over them and tracing it, then cut it out. The spine is 1x8 inches.
- Now lay the cardboard pieces on the table with a gap of at least the thickness of the cardboard between the piece.
- Tape the pieces together with strips of masking tape on both sides.
- Now place that piece on your wrapping paper and cut the wrapping paper 1-inch larger than the cardboard.
- Spread an even coat of glue on the cardboard and place on wrapping paper and smooth out.
- Make slits in the corner of the wrapping paper to make it fit around the rounded edges and apply glue to the wrapping paper and fold down over the cardboard.
- Next cut a piece of wrapping paper 7¾x8-inches and glue it onto the inside. It will cover one half fully and the second half partially.
- Now cover the video tape cover on the front and sides only. The back is not totally covered as it is not seen.
- Then glue the covered box, opening toward the spine, centered onto the cover you just made.
Double Case Book Box
Now I tried to make one book box with 2 cases glued together. It worked out quite well. For this one I used contact paper to cover the cardboard and cases.
- Glue 2 video tape covers together
- Cover them like for the single one
- The dimensions of the cardboard are the same, except the width of the spine has to be adjusted here to 2-inches.
write a comment
Return to << Recycling














To Top
Contact
Sitemap
Search
Tell a Friend
Print